TITAN AIRLOCK dust removal booth
About the product
Titan AirLock booths are innovative dust removal booths designed to clean dust off workwear, acting as a sanitary “air lock” between “dirty” and “clean” zones.
Fast and effective workwear cleaning is especially important at enterprises with high dust levels. By installing Titan AirLock, you will significantly improve employee health and boost productivity by reducing the time spent cleaning workwear.
Risks and hazards of using compressed air
Blowing off workers and their workwear with compressed air is a common but dangerous and ineffective practice. Compressed air is at above-atmospheric pressure and exits at high velocity, with an impact comparable to a blow from a solid object.
This poses serious risks to people: damage to skin and soft tissue, particles driven under the skin, inflammation, eye injuries from dust and shavings, hearing damage, and the risk of air entering the bloodstream and causing a life-threatening air embolism.
Why compressed air blow-off does not solve the problem
Compressed air does not remove dust; it merely scatters it around the room. Contaminants become airborne and settle on equipment and surfaces, increasing dust levels in clean zones and adding to the cleaning and ventilation load.
For safe and effective removal of dust from workwear, use dedicated dust removal systems such as TITAN AIRLOCK and follow safety requirements.
Mining industry
Mining operations (drilling, blasting, crushing, transfer, conveyors) inevitably generate fine dust. It settles on workwear and is carried into administrative buildings, canteens, control rooms and repair areas, compromising sanitary standards. It is important not only to suppress dust where it is generated, but also to block its transfer between “dirty” and “clean” zones.
The TITAN AIRLOCK booth works as an “air lock” at entrances and exits: it quickly removes dust from workwear and footwear and captures it in filters, reducing secondary dust contamination of indoor areas.
- Creates a sanitary checkpoint in personnel flow: “dirty zone → booth → clean zone”. Works together with dust suppression and ventilation.
- Cuts off secondary dust contamination: less sediment indoors and a lower load on cleaning and filter ventilation.
- At the exit from mining, crushing and transfer areas — before the entrance to the administrative building, sanitary checkpoint and canteen.
- At shift change points and along personnel routes to the locker rooms.
- At the entrance to control rooms and repair areas that personnel enter in workwear during the shift.
Metallurgy and mechanical engineering
In foundries, steelmaking, welding and machining shops, metal dust and scale, abrasives from grinding and shot blasting, and molding sand particles settle on clothing. Personnel carry this dust into welfare facilities, canteens, offices and precision assembly areas.
The TITAN AIRLOCK booth cleans workwear at the shop exit with a low-pressure airflow — without hazardous compressed air blow-off — and collects the removed dust in a filter rather than releasing it into the shop air.
- Separates “dirty” production areas from clean zones: welfare facilities, the canteen, quality control and assembly.
- Removes metal and abrasive dust from clothing before it spreads across the facility: less cleaning and less equipment contamination in clean zones.
- At the exit from foundry, welding, blanking and grinding areas.
- Before the entrance to the welfare building, canteen, and precision machining and assembly areas.
- Along personnel routes between the shop, the office and the quality control laboratory.
Chemical industry
During packing, dosing and transfer of powdered products — pigments, reagents, fertilizers, polymer and mineral powders — particles settle on workwear. If they are not removed at the exit from the area, the product is carried into welfare facilities and onto neighboring lines, creating a risk of cross-contamination.
The TITAN AIRLOCK booth is installed at the boundary of the area: it removes dust from clothing and retains it in the filter. For combustible, toxic and other special dusts, the booth and filter design requirements are specified at the selection stage.
- Reduces carry-over of product and reagents beyond the area — lower risk of product cross-contamination.
- Helps maintain sanitary standards between production and welfare zones.
- At the exit from powder packing, dosing, drying and packaging rooms.
- Before moving into welfare facilities, the canteen and the laboratory.
- Between areas handling different products — so that one product is not carried onto another product’s line.
Power industry
At thermal power plants and boiler houses, dust is generated in fuel handling, during coal crushing and conveying, when handling ash and slag, and during boiler repairs. Coal dust and fly ash on workwear are carried into control rooms, service and welfare areas.
The TITAN AIRLOCK booth cleans personnel’s clothing at the exit from dusty zones and captures the dust with a filter, keeping control rooms and welfare areas clean.
- Separates the fuel handling line and the ash and slag handling area from control rooms, service and welfare facilities.
- Reduces dust deposits in clean rooms and the load on their cleaning and ventilation.
- At the exit from the fuel handling line, crushing and unloading units.
- Along personnel routes from the boiler and ash handling sections to the control rooms.
- At the entrance to the welfare building and canteen.
Mineral extraction
At open pits, crushing and screening plants and processing plants, dust rises during crushing, screening, drying and transfer of ore, concentrate and non-metallic materials. Fine mineral dust, often containing quartz, settles on workwear and is carried into administrative and welfare buildings.
The TITAN AIRLOCK booth at the exit from the production site removes this dust from clothing and collects it in the filter, preventing it from spreading further.
- Creates a sanitary barrier between the processing site and the administrative and welfare building.
- Reduces the amount of dust personnel carry off the site and secondary dust contamination of indoor areas.
- At the exit from crushing, screening and processing buildings.
- At the entrance to the administrative building, laboratory and control room.
- At the checkpoint and at personnel shift change points.
Agriculture
At grain elevators, grain dryers, mills and feed mills, receiving, cleaning and transferring grain generates organic dust mixed with mold spores and other allergens. Dust also rises when handling fertilizers and feed. Settling on clothing, it is carried into welfare facilities and neighboring production areas.
The TITAN AIRLOCK booth cleans workwear at the exit from dusty zones and captures dust with a filter, helping keep welfare facilities clean.
- Reduces carry-over of grain and feed dust into welfare facilities, canteens and offices.
- Helps maintain sanitary standards between the production and welfare zones of the enterprise.
- At the exit from grain storage, drying and cleaning sections of the elevator.
- Before the entrance to welfare facilities, the canteen and the office.
- At the exit from fertilizer and feed warehouses.
Benefits
About us
TITAN Trade and Industrial Group is an engineering and manufacturing company that has been operating in the Central Asian industrial market for more than 17 years.
Our work is built on in-house engineering expertise and a manufacturing mindset.
We develop, manufacture and implement engineering solutions for industrial enterprises and also supply specialized equipment from the world’s leading manufacturers.
Leave a request and we will get back to you
Get a Titan Airlock cost estimate for your facility

Specifications
TITAN AIRLOCK
